Enviar mensagem
Casa ProdutosMedidor do nível fluido

Ponta de prova nivelada ultrassônica 50kHz do modo de sono IP67 resistente à corrosão

Ponta de prova nivelada ultrassônica 50kHz do modo de sono IP67 resistente à corrosão

  • Ponta de prova nivelada ultrassônica 50kHz do modo de sono IP67 resistente à corrosão
  • Ponta de prova nivelada ultrassônica 50kHz do modo de sono IP67 resistente à corrosão
  • Ponta de prova nivelada ultrassônica 50kHz do modo de sono IP67 resistente à corrosão
Ponta de prova nivelada ultrassônica 50kHz do modo de sono IP67 resistente à corrosão
Detalhes do produto:
Lugar de origem: CHINA
Marca: kacise
Certificação: CE
Número do modelo: KUS3000
Condições de Pagamento e Envio:
Quantidade de ordem mínima: 0-100
Preço: Negotiable
Detalhes da embalagem: Pacote comum ou pacote feito sob encomenda
Tempo de entrega: 3-10DAYS
Termos de pagamento: L/C, D/A, D/P, T/T, Western Union, MoneyGram
Habilidade da fonte: 100
Contato
Descrição de produto detalhada
Detectando a escala: 400… 15000 milímetros Escala de ajuste: 400….15000mm
Área inusável: 0… 300 milímetros Placa padrão do alvo: 100 milímetros x 100 milímetros
Frequência do transdutor: approx.50 quilohertz Atraso da resposta: Senhora aproximadamente 40
Realçar:

Ponta de prova nivelada ultrassônica do modo de sono IP67

,

Ponta de prova nivelada ultrassônica 50kHz

,

Ponta de prova nivelada ultrassônica resistente à corrosão

Sleep Mode Ultrasound Level Probe Various Working Modes​

 

Adjusting the switching points and the analog output.

 

Switching output and analog output type sensor can be programmed according to user needs.

There are eight types of output functions can be programmed.

All teaching procedures are as follows,

In step 1 the relevant teaching conditions (or high-level voltage GND) teaching point. Step 2 selected from different (and different from step1) and different points of teaching conditions (with different step1). Routine must be completed during a blue LED flashes, otherwise the default value will be valid.

The ultrasonic sensor features a switch output with two teachable switching points. These are set by applying the supply voltage - UB or + UB to the TEACH-IN input. The supply voltage must be applied to the TEACH-IN input for at least 1 s. LEDs indicate whether the sensor has recognized the target during the TEACH-IN procedure. Switching point A1 is taught with - UB, A2 with +UB. Five different output functions can be set.

1, a single switching point, a gap having a hysteresis function normally open.

2, a single switching point having a hysteresis function normally closed gap.

3. The object presence detection - normally open function.

4. The presence of the detection object off opening function.

 

Switching point, Setting distance only after power on. The internal clock can assure can't be

 

Product features


    High sensitivity
    Small size
    IP67 protection level
    Corrosion-resistant shell, suitable for corrosive media and applications

 

Sensor Commands

 

Each command has a total of 6(or 8)bytes, and all sensor commands are sent and displays by HEX. The sensor ID Tag uses 01 as an example

 

LED displays
    Programming time Working time
Red LED ON -- Error accured
OFF Working well Working well
Flash

Doing the echo lost program,

For Single switching point, program, or Detection of object.

-----
Yellow LED ON ---- Object detacted
OFF ------ Echo lost
Flash

Teach in for the status ready,

That means the sensor has locked the set distance for program

-----
Blue LED ON Power on Power on
OFF Power off Power off
Flash

Program period indication,

Only the blue led flashes the program routine can be done

Program can be carried on

 

 

Output type

1 switch output E4, NPN NO/NC, programmable

2 switch output E4, PNP NO/NC, programmable

3 Analog 0-10V output E4 programmable.

4 Analog 4-20mA output E4 programmable

5 RS485 output E4 programmable.

Rated operating current Ie 200 mA , short-circuit/overload protected
Default setting Switching point A1:150mm Switching point A2: 1000mm
Voltage drop ≤ 2.5 V
Repeat accuracy ≤1 %
Switching frequency f ≤ 13 Hz(customized for high frequency version)
Range hysteresis H 5 % of the set operating distance
Temperature influence ±1.5% of full-scale value

Ambient conditions

 

Ambient temperature -25…70℃(248...343K)
Storage temperature -40…85℃(233...358K)

Mechanical specifications

 

Connection V1 connector(M12×1),4-pin
Protection degree IP67
Material Housing brass, nickel-plated
Transducer

epoxy resin/hollow glass sphere mixture;

foam polyurethane, cover PBT

 

Contacto
Xi'an Kacise Optronics Co.,Ltd.

Pessoa de Contato: Ms. Evelyn Wang

Telefone: +86 17719566736

Fax: 86--17719566736

Envie sua pergunta diretamente para nós (0 / 3000)

Outros Produtos

CONTATO

Endereço: mim cidade, No11, estrada sul de TangYan, distrito de Yanta, Xi'an, Shaanxi, China.

Endereço de fábrica:mim cidade, No11, estrada sul de TangYan, distrito de Yanta, Xi'an, Shaanxi, China.